Auto diaľkový ovládač Smart kľúč 4D Transponder Programmer/Trainer pre Toyota Pre-2008 autá
153,00 €
Model: A128758
Manufacturer's product descriptions:
With this OBD by-pass adaptor, you can program till year 2008 all type of Toyota / Lexus 4D transponder key in less than a minute.
PS: you need to use the correct transponder key blanks.
not need to remove any chip , only connect the obd-2 port , then turn on the lock , the key is ok !
TOYOTA KEY PROGRAMMING DEVICE program key for 7 seconds,We have been tested on Land Cruiser 2002 +, RAV 4 2002 +, PRADO, HIACE, Hilux and all Lexus cars till 2007 .
GUIDE: 1) Matches 2 pcs master key and 1 pc vice-key to the IMMO computer
Step 1 -> Step 2 -> Step 3 -> Step A
2) Only program 1 or 3 master keys to the IMMO computer
Step 1 -> Step 2 -> Step 3 -> Step B
Manual Toyota key programmer OBD
This Toyota TEXAS CRYPTO 4D transponder key programming tools is designed simple, and operate easily through OBD-II diagnosis port directly
and no need to press any button. Support to program all kinds of Toyota 4D transponder key, and all kinds of Lexus transponder key, with the
original key programming protocol, non-general initialization protocol.
Safe and highly effective: Only about 10 second to program a new key; the anti-thelf system will not be damaged in safe using way, it is the most quickly and safest programmer.
The operating step as follows: ( read the using step and the importance notice carefully)
Step 1. Turn the ignition on with the correct 4D chip key.
Step 2. Connect the programmer to the OBD-II port of the car, there are some short beep sounds after power on. When the connection with the
Computer of car is done successfully, there is a long beep sound in 3 seconds, and the “LED” is on, as well as the anti-light “SEC”, which means the car is in the “key programming state”.
Step 3. Take away the programmer from OBD-II.
Step [A] Matches 2 pcs master key and 1 pc vice-key to the IMMO computer ( Notice: 2 new master key and 1 vice-key are needed to close the programming procedure)
a) Close all the car door.
b) Insert the first new master key to the ignition for 5 seconds.
c) Insert the other master key to the ignition for 5 seconds.
d) Insert the vice-key to the ignition for 5 seconds.
e) The new ignition key will be confirmed by the new IMMO.
Step [B]Only program 1 or 3 master keys to the IMMO computer( Manual close the mode after complete the programming)
a) Close all the car doors.
b) Insert the new key for 5 seconds.
c) Insert another new key for 5 seconds.
d) Take out the key from ignition
e) Insert the first programmed master key, and turn on the ignition for 5 times quickly, then take it out.
f) The new ignition key will be confirmed by IMMO
Notice:
1, Must use the correct type Toyota 4D transponder key, otherwise you take the consequences.
2, Don’t try to open the cover of programmer and dash board.
3, This machine is only provided for the legal auto repair.
Otherwise you will take the above consequences.
Some type of The parado 4700 and Camry 2007 maybe not suitable for this device
With this OBD by-pass adaptor, you can program till year 2008 all type of Toyota / Lexus 4D transponder key in less than a minute.
PS: you need to use the correct transponder key blanks.
not need to remove any chip , only connect the obd-2 port , then turn on the lock , the key is ok !
TOYOTA KEY PROGRAMMING DEVICE program key for 7 seconds,We have been tested on Land Cruiser 2002 +, RAV 4 2002 +, PRADO, HIACE, Hilux and all Lexus cars till 2007 .
GUIDE: 1) Matches 2 pcs master key and 1 pc vice-key to the IMMO computer
Step 1 -> Step 2 -> Step 3 -> Step A
2) Only program 1 or 3 master keys to the IMMO computer
Step 1 -> Step 2 -> Step 3 -> Step B
Manual Toyota key programmer OBD
This Toyota TEXAS CRYPTO 4D transponder key programming tools is designed simple, and operate easily through OBD-II diagnosis port directly
and no need to press any button. Support to program all kinds of Toyota 4D transponder key, and all kinds of Lexus transponder key, with the
original key programming protocol, non-general initialization protocol.
Safe and highly effective: Only about 10 second to program a new key; the anti-thelf system will not be damaged in safe using way, it is the most quickly and safest programmer.
The operating step as follows: ( read the using step and the importance notice carefully)
Step 1. Turn the ignition on with the correct 4D chip key.
Step 2. Connect the programmer to the OBD-II port of the car, there are some short beep sounds after power on. When the connection with the
Computer of car is done successfully, there is a long beep sound in 3 seconds, and the “LED” is on, as well as the anti-light “SEC”, which means the car is in the “key programming state”.
Step 3. Take away the programmer from OBD-II.
Step [A] Matches 2 pcs master key and 1 pc vice-key to the IMMO computer ( Notice: 2 new master key and 1 vice-key are needed to close the programming procedure)
a) Close all the car door.
b) Insert the first new master key to the ignition for 5 seconds.
c) Insert the other master key to the ignition for 5 seconds.
d) Insert the vice-key to the ignition for 5 seconds.
e) The new ignition key will be confirmed by the new IMMO.
Step [B]Only program 1 or 3 master keys to the IMMO computer( Manual close the mode after complete the programming)
a) Close all the car doors.
b) Insert the new key for 5 seconds.
c) Insert another new key for 5 seconds.
d) Take out the key from ignition
e) Insert the first programmed master key, and turn on the ignition for 5 times quickly, then take it out.
f) The new ignition key will be confirmed by IMMO
Notice:
1, Must use the correct type Toyota 4D transponder key, otherwise you take the consequences.
2, Don’t try to open the cover of programmer and dash board.
3, This machine is only provided for the legal auto repair.
Otherwise you will take the above consequences.
Some type of The parado 4700 and Camry 2007 maybe not suitable for this device
.
* Warranty information is located in the specifications section
Item: Car Remote Smart Key 4D Transponder Programmer/Trainer for Toyota Pre-2008 Cars
Weight: 2.05 oz
* 1-Month Manufacturer's Warranty: this warranty is offered directly by the manufacturer. Should the item become defective within the manufacturer's warranty period (physical damages and damages caused by incorrect usage excluded), customers may send the unit back to www.mevio.sk's Hong Kong office. www.mevio.sk will help forwarding the item to the manufacturer for repair or replacement, and will look after the progress. The customer will need to cover shipping fees both ways.
.
Dimensions: 3.15 in x 1.77 in x 0.91 inWeight: 2.05 oz
Cena: 153,00 €
- Ak chcete pridať komentáre, tak sa musíte prihlásiť alebo zaregistrovať.

Nedávne komentáre
pred 1 deň 5 hod
pred 1 týždeň 1 deň
pred 1 týždeň 4 dni
pred 1 týždeň 4 dni
pred 1 týždeň 4 dni
pred 2 týždne 2 dni
pred 2 týždne 2 dni
pred 2 týždne 2 dni
pred 2 týždne 3 dni
pred 2 týždne 5 dní